Home
ROA-3
ROA-5
ROA-9
ROA-15
ROA-22
ROA-30
ROA-40
ROA-50
ROA-60
ROA-70
ROA-80
ROA-100
ROA-120
ROA-140
ROA-160
ROA-180
ROA-200
ROA-240
ROA-280
ROA-320
ROA-360
i balancer

 

 
Maxsecu Spring Balancer
 

About spring balancer

Spring balancer is an auxiliary tool use with other Hand tools. Maxsecu series spring balancer use the force of coil spring make the suspended hand tools in a no-weight state , The workers will not easily feel tried, and can keep working long time.

Spring balancer use for production line workshop that the worker have fixed position, and use heavy hand tool, and working long time. Spring balancer is widely used in automobile manufacturing, motorcycle manufacturing, household appliances and other machinery manufacturing.

How to use

1. Select the suitable spring balancer after the weight of tool and accessories.
2. Be sure to connect the safety rope, when suspend the spring balancer.
3. Adjust the main worm shaft on the spring balancer, make the balancer weight same as the used tool, let the tool on the non weight status, keeping balance in the travel range, Rotate Clockwise, will add the balance weight, rotate anticlockwise will reduce the balance weight, the weight can not be higher or lower of the capacity of spring balancer.
4. When unload the tool from spring balancer, must pull out the stop pin at first, and rotate clockwise 30 degrees, then put back to groove, lock the pulley and then unload the tool, to prevent sudden unloading, hook quick return wounding worker or damage the tool. After replace the tool, push on the stop pin, and rotate anticlockwise to original position.
5. When the balancer does not hang the tool, do not pull or release it, to avoid the rope run out of groove.
6. When the hand tool move sideways more than 30 degrees , need move back to vertical position, and then release the tool, to avoid the rope jammed.
7. The hand tool must be suspended vertical
.

 

io

Specification

Maxsecu spring balancer have good security, easy to change spare parts, safe load, addtional protection, precise positioning , good balance, simple maintenance, longer service life, accurate adjustment, low wear, etc.

Auto lock ROA3 ROA5

Model
Capacity£¨kg£©
stroke(M)
Weight(kg)
Min
Max
Standard
ROA-3
1
3
1.9
¡¡
1.6
ROA-5
3
5
1.9
¡¡
1.62

The spring balancer of capacity 9-80kg can be achieve remote locking,Replace or repair spring balancer, don't need climbing up the stairs to lock the balancer, can use control panel locking the spring balancer,Every spring balancer is equipped with a locking tool at the factory.

Model
Capacity£¨kg£©
stroke(M)
Weight(kg)
Min
Max
Standard
ROA-9
5
9
1.8
¡¡
4.5
ROA-15
9
15
1.8
¡¡
4.8

1. When use the balancers, the installation height to be reasonable, try to use the balance tower wheel diameter of the largest surface (each pull as far as possible not to use
Stroke limit), this can ensure that the upper and lower hooks in the same force point, to reduce the tower wheel and wire rope wear.
2.often check the balancer above the car is flexible, whether with the balancer synchronization. Pull up and down as far as possible to maintain the vertical state, the most vertical pull
Can not exceed 30 degrees.
3, the balancer up and down can not be slammer, to prevent the chute.
4. after the work will be reduced to the bottom of the workpiece to prevent the rotation of the object when the rotation caused by loose rope.
5, regularly check the wire rope, add lubricating oil.
6, balancer with a safety rope, the installation must be connected to the balancer, to prevent decoupling, resulting in security incidents.

Model
Capacity£¨kg£©
stroke(M)
Weight(kg)
Min
Max
Standard
ROA-22
15
22
1.5
¡¡
8
ROA-30
22
30
1.5
¡¡
8.5

First, the demolition of the balancer, the first need to adjust the worm counterclockwise rotation, so that coil spring
When you are in a relaxed state, you can do other work.
Second, the monthly response to a balancer for a security check, the main contents are:
1, fasteners are loose.
2, the upper and lower hook with or without bruises, cracks and other defects.
3, the insurance rope is reliable.
4, shell and tower wheel with or without cracks, serious wear and tear.
5, shell device can work properly.
Third, long-term do not have to unload the preservation, pay attention to moisture, so as not to coil spring rust.

 

Model
Capacity£¨kg£©
stroke(M)
Weight(kg)
Min
Max
Standard
ROA-40
30
40
1.5
¡¡
10
ROA-50
40
50
1.5
¡¡
10.2
ROA-60
50
60
1.5
¡¡
10.8
ROA-70
60
70
1.5
¡¡
11.2
ROA-80
70
80
1.5
¡¡
12

Model
Capacity£¨kg£©
stroke(M)
Weight(kg)
Min
Max
Standard
ROA-100
80
100
1.9
¡¡
22
ROA-120
100
120
1.9
¡¡
23
ROA-140
120
140
1.9
¡¡
24
ROA-160
140
160
1.9
¡¡
24.5
ROA-180
160
180
1.9
¡¡
25
ROA-200
180
200
1.9
¡¡
25.5
ROA-120/240
200
240
1.9
¡¡
50
ROA-140/280
240
280
1.9
¡¡
52
ROA-160/320
280
320
1.9
¡¡
54
ROA-180/360
320
360
1.9
¡¡
55
ROA-200/400
360
400
1.9
¡¡
56

Model
Min
Max
Stroke
Weight£¨KG£©
ROAII-105
85
105
2
25
ROAII-125
105
125
2
26
ROAII-145
125
145
2
27
ROAII-165
145
165
2
28
ROAII-185
165
185
2
29
ROAII-205
185
205
2
30

Our Customer: TOYOTA, FOTON, HONDA, MAZADA...

 

The series of ROA spring balancers are auxiliary tools Which are used with operational tools. They can make the operational tools weightless and reduce the labor intensity of operators largely. Thus, labor productivity can be increased. Spring balancers are extensively used in the field of automobile making, tractor making and machine making, etc.

Attension:

1. You should first adjust the No.5 spare part anticlockwisely and make the spring flabby
when you want to dismantle balancer.
2. Every month you should examine your balancers.
3. If you don't use balaners for a long time, you should demount the load and moistureproof
the balancer.

PDF Download

 

 
    Glory Engineering Shanghai Co.,Ltd  0086-21-62800366 15021911896
Email:romaxsecu@gmail.com